Submission

Registration and login are required to submit items online and to check the status of current submissions.

Already have a Username/Password for JURNAL TEKNOKES?
GO TO LOGIN

Need a Username/Password?
GO TO REGISTRATION

Author Guidelines 

A. General Requirements
The minimum standard requirements of the JURNAL TEKNOKES must be:

1. Written in English.
2. The length of the submitted paper is at least 8 pages (10 pages including the references)
3. Use Mendeley Desktop for reference management.
4. The citation style is IEEE
5. Make sure that your paper is prepared using the Jurnal Teknokes paper template
6. The article must be under 20 % checked by plagiarism software [example: Turnitin]

B. Structure of The Manuscript

The manuscript must be prepared and suggested present follow the structure:

1. Title. The title of the paper should describe research aims, method/model, and objective without acronym or abbreviation
2. Abstract. The Abstract has 250 to 300 WORDS; No citation; The abstract should contain Background or research problem (2-3 Sentences), AIM (1 sentence), Research Methodology (2-4 Sentences), and Results (Minimal 8 Sentences), the Conclusions (2-3 Sentences) and Implication (1 sentence).
3. Section structure. Authors are suggested to present their articles in the section structure: I. Introduction - II. Materials and Method - III. Results - IV. Discussion – V. Conclusion
4. References. Expect a minimum of 40 references, primarily with a minimum of 90% to Scopus journal papers (International Journal). The references must be up-to-date references (5 years back).

C. Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
2. The submission file is using the  Jurnal Teknokes paper template
3. The submission file is in Microsoft Word document file format (10 MB Limit File Size).
4. The reference uses the IEEE style. Please use Mendeley Desktop to help reference management.

D. Reviewing of manuscripts
Every submitted paper is independently reviewed by at least two peer reviewers. The decision for publication, amendment, or rejection is based upon their reports/recommendations. If two or more reviewers consider a manuscript unsuitable for publication in this journal, a statement explaining the basis for the decision will be sent to the authors within three months of the submission date.

E. Revision of manuscripts
Manuscripts sent back to the authors for revision should be returned to the editor without delay. Revised manuscripts can be sent to the editorial office through the Online Submission Interface. The revised manuscripts returned later than three months will be considered as new submissions. Together with sending the revised paper the author must send the response to the reviewer in a separate file with the following format [download respons to reviewers file].

F. Publication and Authorship Ethics

• Authors are required to provide a complete list of references cited in their paper.
• If authors received any financial support to conduct the research that is reported in the submitted paper, they should provide the information.
• Jurnal Teknokes cannot bear plagiarism and fraudulent data in any paper. It has a strict policy against plagiarism, which is checked through two methods: reviewer check and plagiarism prevention tool (iThenticate). All submissions will be checked before being sent to reviewers.
• In case of presence of any fraudulent information in an article, its authors will be responsible for providing retractions or corrections of mistakes.
• It is strictly prohibited to publish the same research in more than one journal.

G. Manuscript Preparation Guidelines

Manuscript content should be organized in the following order: Title; Authors Name; Authors Affiliation; Abstract; Keywords; Introduction; Method; Findings and Discussion; Conclusions; Acknowledgements; and References.

Manuscript Preparation Guidelines

Manuscript content should be organized in the following order: Title; Authors Name; Authors Affiliation; Abstract; Keywords; Introduction; Method; Findings and Discussion; Conclusions; Acknowledgements; and References.

1. Paper Title

• This is your opportunity to attract the reader's attention. Remember that readers are the potential authors who will cite your article. Identify the main issue of the paper. Begin with the subject of the paper. The title should be accurate, unambiguous, specific, and complete. Do not contain infrequently-used abbreviations. The title of the paper should be in 22pt bold Helvetica and be left aligned. The title should not be more than 16 words.

2. Authors Name and Affiliations

• Write Author(s) names without title and professional positions such as Prof, Dr, Production Manager, etc. Do not abbreviate your last/family name. Always give your First and Last names.
• Write clear affiliation of all Authors. Affiliation includes: name of department/unit, (faculty), name of university, address, country.
• Author names should be in 10 pt Helvetica bold . Author affiliations should be in 8 pt Helvetica. Authors’ email addresses and affiliation should be in 8 pt Helvetica.

3. Abstract and Keywords

• Abstract should stand alone, means that no citation in abstract. Consider it the advertisement of your article. Abstract should tell the prospective reader what you did and highlight the key findings. Avoid using technical jargon and uncommon abbreviations. You must be accurate, brief, clear and specific. Use words which reflect the precise meaning, Abstract should be precise and honest. Please follow word limitations (250-300 words).
• On the abstract, explicitly write in Times New Roman 10 pt: Problem, objective of the papers, Contribution of your study, method, findings, and conclusion and implication.
• Below the abstract, about three to five keywords should appear together with the main body of the article with the Time New Roman font size 10. Each word/phrase in keyword should be separated by a comma (,).

4. Introduction

• In Introduction, Authors should state the objectives of the work at the end of introduction section. Before the objective, Authors should provide an adequate background, and very short literature survey in order to record the existing solutions/method, to show which is the best of previous researches, to show the main limitation of the previous researches, to show what do you hope to achieve (to solve the limitation), and to show the scientific merit or novelties of the paper. Avoid a detailed literature survey or a summary of the results.
• Section should be assigned with a heading as shown in Figure below Heading 1, Heading 2 and Heading 3. Heading 1 is Helvetica 9, bold. Heading 2 is Helvetica 9, bold, italic. Heading 3 is Helvetica 9.

5. Method

• The method should make readers be able to reproduce the experiment. Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference; only relevant modifications should be described. Do not repeat the details of established methods.

6. Results 

• Results should be clear and concise. The results should summarize (scientific) findings rather than providing data in great detail. Please highlight differences between your results or findings and the previous publications by other researchers.
• Figure Caption should be written using Helvetica 7, bold, center.
• Table Caption should be written using Helvetica 7, bold, center.

7. Discussion

• Discussion must consist of a deep interpretation of your result, limitations or weaknesses, comparison of your result to other related studies, and implication of your study.
• The discussion should explore the significance of the results of the work, not repeat them. Avoid extensive citations and discussion of published literature. In discussion, it is the most important section of your article. Here you get the chance to sell your data. Make the discussion corresponding to the results, but do not reiterate the results. Often should begin with a brief summary of the main scientific findings (not experimental results). The following components should be covered in discussion: How do your results relate to the original question or objectives outlined in the Introduction section (what)? Do you provide an interpretation scientifically for each of your results or findings presented (why)? Are your results consistent with what other investigators have reported (what else)? Or are there any differences?

8. Conclusions

• The conclusion must consist of: re-state the aim, findings, and future works.
• Conclusions should answer the objectives of research. Tells how your work advances the field from the present state of knowledge. Without clear Conclusions, reviewers and readers will find it difficult to judge the work, and whether or not it merits publication in the journal. Do not repeat the Abstract, or just list experimental results. Provide a clear scientific justification for your work, and indicate possible applications and extensions. You should also suggest future experiments and/or point out those that are underway.

9. Acknowledgement

• Recognize those who helped in the research, especially funding supporter of your research. Include individuals who have assisted you in your study: Advisors, Financial supporters, or may other supporter i.e. Proofreaders, Typists, and Suppliers who may have given materials.

10. References

• Cite the main scientific publications on which your work is based. Cite only items that you have read. Do not inflate the manuscript with too many references. Avoid excessive self-citations. Avoid excessive citations of publications from the same region. Check each reference against the original source (authors' name, volume, issue, year, DOI Number).
• Every source cited in the body of the article should appear in the reference, and all sources appearing in the reference should be cited in the body of the article.
• The sources cited should at least 80% come from those published in the last 10 years. The sources cited are primary sources in the forms of journal articles, books, and research reports, including theses and dissertations. Citations from journal should be at least 80% of the total references cited.
• Quotation and references follows IEEE style and the author's biography should be included at the end of the article.